FSG-800/1000 Series Surface Grinding Machine Features
Double walled column structure, provide high rigid support. Adopt counterweight balance, make the spindle move stably, and reduce the load of the leadscrew, keep the accuracy for a long time.
Independent, large capacity hydraulic tank, standard equiped with air cooling , isolate heat and vibroseis, to provide excellent power for precision grinding.
Flat-V guideway are adopt on vertical motion, and coat with TURCITE-B belt, to get low fricion coefficien.
Flat-V guideway are adopt on longitudinal and cross way to get good guidance quality, and coat with TURCITE-B belt, precision handscraping to keep
AC servo motor drives on cross and vertical motion. MPG(electronic hand wheel) replaces the tradition mechanical hand wheel, which can realize higher accuracy and easy operation.
Adopt 7 inch LCD-TFT colorful touch screen, built in program of our engineer's genius designation to make the operation very simple and convenient for the opeator.
Adopt hydrostatic bearing for the spindle to get high rigidity ( high precision rolling bearing for export), together with 18.5KW or 22KW motor to provide strong power,apply to the heavy duty machining. Spindle rotation is supported by rigidity oil film, no wear, ensure the long-time precision and life.
Well designed machine bed is one high grade casting piece, which insure heavy duty cuting
strengthen ribs are set inside of the rear slide base, make sure great stability suport for spindle.
super great power spindle unit is most important to the machine. It is really an elaboration under well designed, and our ultimate goal is to balance high rigidity and great accuracy.
the machine bed and rear slide bed are assembled to one piece, to supply super strong base for efficient working.
the photo shows includeing optional equipment.
FSG-1000series grinder main parameter
three models to select: 1000x2200, 1000x3000, 1000x4000.
| (Specifications) |
ITEM /MODEL
•Working area |
FSG-100220ZNC |
FSG-100300ZNC |
FSG-100400ZNC |
| |
Table size |
mm |
1000*2200 |
1000*3000 |
1000*4000 |
| |
Max. ground area |
mm |
1000*2200 |
1000*3000 |
1000*4000 |
| |
Max. gound height |
mm |
|
670(830/1000 optional) |
|
| |
Magnetic chuck size(optional) |
mm |
1000*1000*2 |
1000*1000*3 |
1000*1000*4 |
| |
Max. loading capacityfindude chuck) |
kg |
4000 |
5000 |
5000 |
| • Three axis motion |
| |
Speed of table longitudinal move |
m/min |
5~25 |
5~25 |
5~25 |
| |
Cross Motion |
|
|
|
|
| |
Intermittent feed rate |
mm/t |
1~50 |
1~50 |
1~50 |
| |
Rapid speed |
mm/min |
50~2000 |
50~2000 |
50~2000 |
| |
Feed of MPG |
mm/div |
0.005 |
0.005 |
0.005 |
| |
Vertical Motion |
|
|
|
|
| |
Auto down feed rate |
mm/t |
0.005-0.05 |
0.005-0.05 |
0.005-0.05 |
| . |
Rapid down speed |
mm/min |
50-2000 |
50-2000 |
50-2000 |
| |
Feed of MPG |
mm/div |
0.005 |
0.005 |
0.005 |
| • Grinding wheel |
| |
Rotating speed |
r/min |
960 (50HZ)/1150(60HZ)(Optional variable speed) |
| |
Grind wheel size |
mm |
500*100*203 |
500*100*203 |
500*100*203 |
| |
Grind wheel size for export |
mm |
500*100*305 |
500*100*305 |
500*100*305 |
| • Device capacity |
| |
Spindle motor power |
kw |
18.5/22 |
18.5/22 |
18.5/22 |
| |
Oil pump motor |
kw |
7.5 |
11 |
15 |
| |
Y/Z servo motor |
kw |
3 |
3 |
3 |
| |
Total rated power |
KVA |
45 |
51 |
57 |
| •Dimensions and weight |
| |
Floor space (L*W*H) |
cm |
720*520*250 |
870*520*250 |
1000*520*250 |
| |
Gross weight |
kg |
14000 |
15500 |
19500 |
standard accessories:
Operating manual, Working lamp, Balancing arbor, Splashing guard, Coolant tank, Wheel flange and extractor, Standard wheel, Wheel dresser stand, Y/Zaxis MPG, Leveling wedge, Wheel extractor, Magnetic chuck controller, HMI+PLC auto, groud controller
optional accessories:
Electrical magnetic chuck, Magnetic separator, Paper filter, Magnetic separator and Paper filter, Digital readout, Oil tank guard, Hydro drive parallel wheel dresser, Wheel flange and extractor, Balancing stand
Audited Supplier 
){kind=link}
){kind=link}