| Customization: | Available |
|---|---|
| Application: | Milling Machine |
| Function: | Universal |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Type F3,F3-6 super spacer is designed for using and indexing inboth horizontal and vertical position.lIt is the most optimum in use for millingmachines,grinding machines,drilling machines,planer and etc.The divisions in
2,3,4,6,8,12,24 are permitted by notched plate,and any desired angular indexing canbe performed by worm and worm shaft,two methods can be switched over conve-niently.
Accessories:
Six Mask plates
Three 6-square spanner wrenches
3-jaw chuck
face plate(Optional)
| Items | F3 | F3-6 |
| Center height mm | 150 | 130 |
| Center diamete r of the spind le mm | φ 119.774 | φ80 |
| Locating diameter of the spindle mm | φ212 | φ170 |
| Divisions | 2,3,4,6,8 ,12,24 | |
| Graduated disc of spindle | 360° | |
| Modules of worm and worm gear | 1.5 | 1.25 |
| Transmission ratio of worm and worm gear | 1:90 | |
| Showed degree of worktable per revolution of worm | 4° | |
| Minimum value of vernier | 10" | |
| Width of the locating key mm | 16 | |
| Matched chuck | K31210A | K31167 |
| 24 divisions ind iv i dual error | 25" | |
| Worm gear dividing error | ±60" | |
| Net weight Kg | (62)77 | (40)50 |
| Gross weight Kg | (73)88 | (50)60 |
| Case dimensions mm | 490×425×380 | 470×350×360 |
Installation sketch and dimensions:
| A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | |
| F3 | 310 | 255 | 200 | 78 | 16 | 18 | 230 | 150 | 75 | 126 | 90 | 155 | 244 | 285 | Φ210 |
| F3-6 | 250 | 220 | 188 | 78 | 16 | 18 | 198.75 | 130 | 66 | 112 | 80 | 150 | 220 | 235 | Φ167 |
){kind=link}