| Customization: | Available |
|---|---|
| Application: | Milling Machine |
| Function: | Universal |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
TX121000 adds a Heidenhain encoder as a indexing display element on the basis of TS1000A to help complete the accurate positioning of the workbench.
TX121500 digital display manual motor turntable, installed horizontally on the work surface when working. It uses the high-precision double-lead worm pair as the main indexing element and the high-precision Heidenhain encoder as the indexing display element to assist in the accurate positioning of the table. In addition, in the measurement work, it can also be used for precision Angle measurement. When working, the variable frequency motor is first used to drive the worm pair to achieve rough positioning, read through the digital display device, after the motor stops, rough fine-tuning is implemented through the hand wheel at the other end of the worm, and finally fine-tuning is implemented through the fine-tuning knob to achieve accurate positioning.
| TX121000 | TX121200 | TX121500 | |
| Diameter of table mm | 1000 | 1500 | |
| Total thickness mm | 350 | 460 | |
| Center bore diameter mm | φ75 | φ100 | |
| Morse tape r of the centr hole | Morse No.6 | Morse No.6 | |
| Width of the T-slot mm | 8-22 | 8-22 | |
| Module of worm gear mm | 5.5 | 5 | |
| Worm gear ratio | 1:120 | 1:144 | |
| Total reduction ratio of motor or handwheel | 1:360 | ||
| Total transmission ratio | 1:7200 | 1:14400 | |
| Table gyration angle per pulse | 0.1-4r/min | ||
| Max torque capacity of worm gear | 500 | 800 | |
| Load capacity | 2500 | 3000 | |
| Graduation of the table | 360° | 360° | |
| Minimum angular resolution | 1" | 1" | |
| Dividig accuracy | 10" | 5" | |
| Repeatability accuracy | 4" | 3" |
){kind=link}